Setting up for wireless operation
www.kodak.com/go/support
6
The Connecting screen (or the wireless network security screen, if enabled) appears.
Or, tap Exit to go to the Home screen without connecting. (See page 27.)
2 If you do not have wireless network security enabled, go to step 3.
(However, we recommend that you enable your network security to prevent others
from accessing your wireless home network.)
If you have wireless network security enabled, the on-screen keyboard
appears. Enter your security key:
a Highlight a character, then tap (Select) to enter it in the text box.
(To highlight a character, slide along the bottom of the touch border or tap
below the slider arrows.)
b Repeat for each character of your security key, then tap Done.
On-screen keyboard:
Congratulations! You have successfully connected your frame to your network!
Select
Text box
Slider
Slider arrows
Backspace key erases text
Bottom border - keep sliding
(or tapping slider arrows)
left/right to go to the previous
or next row.
Touch tips
Right border - tap only
To Next Page
Loading...
