Setting up Web content
www.kodak.com/go/support
12
MAC OS users
MAC OS users, here’s how to open your frame’s Device Settings Web page:
1 Make sure the frame is connected to your wireless network (page 5) and your
computer is connected to the Internet.
2 Get your frame’s IP address:
a On the frame, tap Home
→ Settings → Network, then tap Select.
b Make a note of the IP address (format: XXX.XXX.X.XXX) from the frame’s
Network Settings screen.
3 Open a browser (for example, INTERNET EXPLORER, MOZILLA FIREFOX, SAFARI,
etc.) on your computer.
4 Enter the IP address in the browser’s address window, then press Enter.
The KODAK Displays and Devices Configuration page (Display Settings Web page)
opens in your browser (see page 13).
Enter the IP address here
To Next Page
Loading...
