28
January 1996
Auto Focus
The Auto Focus icon allows you to select from three focus settings:
multi-spot auto focus, single-spot auto focus, and close-up focus.
When you use the MODE button to select the Auto Focus icon, the
current setting appears.
The green light on the viewfinder flashes in the following cases:
– The distance is too close at the normal mode.
– The distance is too close or too far at the close-up mode.
The selected focus setting is canceled when you turn the camera off.
When you turn the camera back on, automatic focus with multi-spot is
the default setting.
Multi-spot Auto Focus
When auto focus with multi-spot is selected, the distances of subjects
are measured with two sensors. These sensors measure the distance
in three horizontal points. The focus is adjusted to the closest distance.
Multi-spot auto focus is the default focus setting.
Single-spot Auto Focus
When auto focus with single-spot is selected, the focus is adjusted to
the distance measured by the center sensor.
To Next Page
Loading...
