44
January 1996
Canceling the Copy Operation
If the memory card to which you are copying images is full and you do
not have another card or you do not want to copy the rest of the images
to another card, you can stop the copy operation.
NOTE: You can only stop a copy operation after it has paused to
allow you to insert another memory card. You cannot stop
the copy operation during the time it is copying images to a
memory card.
Press the MODE button to stop the copy operation. The icons stop
flashing and the Copy Images icon disappears from the LCD. “FUL”
appears in the Images Remaining Counter and the number of uncopied
images is displayed in the Images Taken Counter.
The status is reset when the memory card is ejected from the camera,
the camera is turned off, or the camera goes into the power save mode.
To Next Page
Loading...
