69
January 1996
Flash Does Not Work
Cause Solution
The flash is off. Turn the flash on as described in the
Camera Features
section.
The batteries are low. Replace the batteries or use an AC
power adapter.
For information about installing the
batteries, refer to the
Using the
Camera
section.
The flash tube has
burned out.
Take the camera to your dealer for
service.
Picture Is Too Dark
Cause Solution
The flash is not on. Turn on the flash as described in the
Camera Features
section.
The subject is too far
away for the flash to
have an effect.
Move so there is no more than
9 feet (2.7 m) between the camera
and the subject.
The exposure is not
appropriate for the lighting.
Adjust the exposure as described in
the
Camera Features
section.
The subject is in front of
a bright light.
Change your position so the light is
not behind the subject.
To Next Page
Loading...
