36 www.kodak.com/go/support
Transferring and printing pictures
Printing pictures
Direct printing with an EasyShare all-in-one printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need a camera with fully charged battery, a
PictBridge enabled printer, and a USB cable.
Connecting the camera to an EasyShare all-in-one printer
1 Turn off the camera and printer.
2 Connect the appropriate USB cable from the camera to the printer.
Printing from an EasyShare all-in-one printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu turns off, press any button to
redisplay it.
2 Highlight a printing option, then press OK.
Current Picture—Press to choose a picture. Choose the number of copies.
Tagged Pictures—If your printer is capable, print pictures that you tagged for
printing and choose a print size.
Index Print—Print thumbnails of all pictures. (This option requires one or more
sheets of paper.) If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of copies.
Image Storage—Access Auto or Internal Memory.
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see page 34. In Favorites mode, the current favorite picture is displayed.
To Next Page
Loading...
Need help?
General
