Kodak EasyShare C1013 User Manual

Troubleshooting
www.kodak.com/go/support
41
Camera/computer communications
Memory card full.
■ Insert a new card (see page 3).
■ Transfer pictures to the computer (see page 35).
■ Delete pictures/videos (see page 14).
Memory card and
internal memory
full.
■ Transfer pictures to the computer (see page 35).
■ Delete pictures/videos (see page 14), or insert a new card
(see page 3).
If... Try one or more of the following
The computer does
not communicate
with the camera.
■ Visit www.kodak.com/go/c1013support.
■ Turn on the camera (see page 2).
■ Install new batteries (see page 1) or charge rechargeable batteries.
■ Connect the USB cable to camera and computer port (see page 35).
■ Install the software (see page 34).
■ Disconnect the USB cable. Close all software applications. Re-install
the software (see page 34).
■ Disconnect camera from the computer. Close all software applications,
reconnect camera.
Cannot transfer
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.)
■ Disconnect the USB cable. (If using camera dock or printer dock,
disconnect cable and remove camera from dock). Close all open
applications. Re-install the software (see page 34).
■ Disconnect the USB cable. Close all software applications. Re-install
the software (see page 34).
If... Try one or more of the following

Kodak EasyShare C1013 Specifications

General

Brand	Kodak
Model	EasyShare C1013
Category	Digital Camera
Language	English