Doing more with your camera
www.kodak.com/go/support
29
Changing picture-taking settings
You can change settings to get the best results from your camera:
1 Press the Menu button. (Some settings are unavailable in some modes.)
2 Press to highlight the setting you wish to change, then press the OK button.
3 Choose an option, then press the OK button.
4 Press the Menu button to exit.
Setting Icon Options
Exposure Compensation
(Still mode)
Choose how much light
enters the camera.
This setting remains until you
turn the Mode dial.
If pictures are too light, decrease the value.
If pictures are too dark, increase the value.
NOTE: When the camera screen is on in any Still capture mode,
press to adjust exposure compensation.
Exposure Compensation returns to zero if Long Time
Exposure is set.
Unavailable in Video mode.
Picture Size
Choose a picture resolution.
This setting remains until you
change it.
4.0 MP (default)—for printing up to 20 x 30 in.
(51 x 76 cm); pictures are highest resolution and
largest file size.
3.5 MP (3:2 Best)—ideal for printing 4 x 6 in.
(10 x 15 cm) prints without cropping. Also for printing
up to 20 x 30 in. (51 x 76 cm); some cropping may
result due to the 3:2 aspect ratio.
3.1 MP—for printing up to 11 x 14 in. (28 x 36 cm);
pictures are medium resolution with smaller file size.
2.1 MP—for printing up to 8 x 10 in. (20 x 25 cm);
pictures are medium resolution with smaller file size.
1.1 MP—for printing up to 5 x 7 in. (13 x 18 cm); for
emailing, Internet, or screen display; pictures are
lowest resolution and smallest file size.
To Next Page
Loading...
Need help?
General
