Doing more with your camera
www.kodak.com/go/support
21
NOTE: Some settings are unavailable in some modes.
Setting Options
Exposure Compensation
Control how much light enters
the camera.
This setting remains until you turn
the Mode dial.
-2.0 to +2.0 (in 0.5 increments)
Picture Size
Choose a picture resolution.
This setting remains until you
change it.
5.0 MP (default)—for printing up to 20 x 30 in. (51 x 76
cm); pictures are highest resolution and largest file size.
4.4 MP (3:2)—ideal for printing 4 x 6 in.
(10 x 15 cm) prints without cropping. Also for printing up to
20 x 30 in. (51 x 76 cm).
3.1 MP— for printing up to 20 x 30 in. (51 x 76 cm);
pictures are medium resolution with smaller file size.
2.1 MP—for printing up to 11 x 14 in. (28 x 36 cm);
pictures are medium resolution with smaller file size.
1.1 MP—for printing 4 x 6 in. (10 x 15 cm), emailing,
Internet, screen display, or for conserving space.
White Balance
Choose your lighting condition.
This setting remains until you turn
off the camera.
Auto (default)—automatically corrects white balance.
Ideal for general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light
bulbs. Ideal for indoor pictures under tungsten or halogen
lighting without flash.
Fluorescent—corrects the green cast of fluorescent
lighting. Ideal for indoor pictures under fluorescent lighting
without flash.
To Next Page
Loading...
Need help?
General
