20 www.kodak.com/go/support
Doing more with your camera
Using burst
1 In most Still modes, press the Burst button repeatedly to choose an option.
2 Press the Shutter button halfway to focus and set exposure.
3 Press the Shutter button completely down and hold it to take pictures.
The camera stops taking pictures when you release the Shutter button, when the
pictures are taken, or when there is no more storage space.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page 10).
Changing picture-taking settings
You can change settings to get the best results from your camera:
1 Press the Menu button.
2 Press to highlight a setting, then press the OK button.
3 Choose an option, then press the OK button.
4 Press the Menu button to exit.
Option Description Purpose
Burst
Camera takes up to 3 pictures (3 per second) while the
Shutter button is pressed.
Capture an expected
event.
Example:
A person swinging a
golf club.
First 3 pictures are
saved.
To Next Page
Loading...
Need help?
General
