Doing more with your camera
14 www.kodak.com/go/easysharecenter
Using the flash
1 Press the Info button to show shortcuts on the
LCD.
2 Press to highlight the Flash icon on the LCD.
Press to choose a Flash mode.
NOTE: You can also press to choose a Flash mode when
shortcuts are not visible.
Flash modes Flash fires
Auto When the lighting conditions require it.
Fill (Flash On) Every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is “backlit”
(when the light is behind the subject).
Red Eye
To turn the red eye
feature on/off,
press the Menu
button, then see
the Setup menu.
If Red-eye Pre-flash is turned off, the flash fires once and the
camera automatically corrects red-eye in the picture.
If Red-eye Pre-flash is turned on, the flash fires once so the eyes
become accustomed to the flash, then fires again when the
picture is taken.
Off
urg_01078.book Page 14 Tuesday, June 23, 2009 7:48 AM
To Next Page
Loading...
Need help?
General
