Doing more with your camera
www.kodak.com/go/support
21
Using burst
1 In most Still modes, press the Self Timer/Burst button repeatedly to choose the
Burst option.
2 Press the Shutter button halfway to set the auto focus and exposure.
3 Press the Shutter button completely down and hold it to take the pictures.
The camera stops taking pictures when you release the Shutter button, when the
pictures are taken, or when there is no more storage space.
NOTE: During Quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page 13).
Running a slide show
Use the Slide Show to display your pictures and videos on the LCD screen.
To run a slide show on a television or on any external device, see page 23.
To save battery power, use an optional Kodak 3-volt AC adapter.
(Visit www.kodak.com/go/cd33accessories.)
Starting the slide show
1 Press the Review button, then press the Menu button.
2 Press to highlight Slide Show , then press the OK button.
Option Description Purpose
Burst
Camera takes up to 3 pictures (2 per second) while the
Shutter button is pressed.
Capture an expected
event.
Example:
A person swinging a
golf club.
First 3 pictures
are saved.
To Next Page
Loading...
Need help?
General
