EasyManuals Logo

Kodak EASYSHARE M1063 User Guide

Kodak EASYSHARE M1063
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Appendix
www.kodak.com/go/m1063support 27
FCC compliance and advisory
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the
equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the
receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Where shielded interface cables have been provided with the
product or specified additional components or accessories elsewhere defined to be used with the installation of
the product, they must be used in order to ensure compliance with FCC regulation.
FCC and Industry Canada
This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation
.
Kodak EasyShare M1063/MD1063/MX1063 digital camera

Other manuals for Kodak EASYSHARE M1063

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kodak EASYSHARE M1063 and is the answer not in the manual?

Kodak EASYSHARE M1063 Specifications

General IconGeneral
Megapixel10.3 MP
Camera typeCompact camera
Sensor typeCCD
Image stabilizerYes
Image sensor size1/2.33 \
Digital zoom5 x
Optical zoom3 x
InterfaceUSB 2.0
Digital SLRNo
Dimensions (WxDxH)91 x 21 x 57 mm
Camera shutter speed4 - 1/1400 s
Focal length (35mm film equivalent)32 - 96 mm
Focus adjustmentAuto
Normal focusing range0.6 - ∞ m
Macro focusing range (tele)0.35 - 0.70 m
Macro focusing range (wide)0.10 - 0.70 m
Light meteringCentre-weighted
ISO sensitivity64, 100, 200, 400, 800, 1000
Flash modesauto, fill-in, Flash off, Red-eye reduction
Flash range (tele)0.6 - 1.7 m
Flash range (wide)0.6 - 3 m
Internal memory16 MB
Compatible memory cardssd, sdhc
Motion JPEG frame rate15 fps
Maximum video resolution640 x 480 pixels
Display diagonal2.7 \
Display resolution (numeric)230000 pixels
Product colorBlue
Battery typeKLIC-7001
Scene modesBacklight, beach, Candlelight, Children, Close-up (macro), Documents, Fireworks, Museum, Night landscape, Panorama, Portrait, self-portrait, Sports, Sunset, Landscape (scenery)
Photo effectsblack&white, Neutral, Sepia
White balanceauto, daylight, Fluorescent, Shade, Tungsten
Camera playbackSlide show
Weight and Dimensions IconWeight and Dimensions
Depth21 mm
Width91 mm
Height57 mm
Weight125 g

Related product manuals