Doing more with your camera
22 www.kodak.com/go/support
Using Program mode
Program mode gives access to manual settings like ISO, White Balance,
Focus Zone, and Exposure Compensation.
1 Press the Mode button , choose Scene mode (see page 20), and
press OK. Choose Program, then press OK.
2 Press to choose a setting, then press OK.
Press to change a setting, then press OK to save it.
Self-timer/
Burst
Self-timer lets you include yourself in a picture. Burst
takes a series of pictures in rapid succession.
Exposure
Compensation
Adjust the exposure. If a scene is too light, decrease
the setting; if it’s dark, increase the setting.
ISO Adjust the camera’s sensitivity to light. Higher ISO
indicates greater sensitivity.
White
Balance
To make picture color more accurate, choose the
setting that matches the current lighting.
Focus Zone Choose Multi-Zone, Center-Zone, Face Priority.
Color Mode Choose Vivid, Full, Basic, Black & White, or Sepia.
Sharpness Choose Sharp, Normal, or Soft.
Settings Display the Settings menu.
White
Balance
Exposure
compensation
ISO Focus
Zone
Color
Mode
Self-
timer
Sharpness Settings
urg_01270.book Page 22 Wednesday, May 4, 2011 8:59 AM
To Next Page
Loading...
