Doing more with your camera
www.kodak.com/go/support
35
Using the self-timer
1 Choose the desired self-timer mode, then compose the scene.
2 Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
NOTE: In Panoramic modes (page 37), only the 2- and 10-second self-timer options are available.
Use the same procedure to take a video, but:
■ Slide the mode switch to Video .
■ Press the Shutter button completely down.
NOTE: Only the 2- and 10-second options are available in video mode. The video stops when no storage
space remains.
In this mode A picture is taken after...
A 10-second delay (so you have time to get into the scene).
A 2-second delay (for a steady, auto-shutter release on a tripod).
A 10-second delay. A second picture is taken 8 seconds later.
10
2
2x
Press
appears in the LCD status area.
until the desired self-timer icon
To Next Page
Loading...
