22 www.kodak.com/go/support
Changing settings and more
Setting the time, date, and on/off times
The first time you turn on your frame, the Time, Date, and On/Off screens each appear
automatically after you select your language (see page 5).
To change the settings after your frame is set up and running:
1 Press OK to pause a slide show and display the control panel icons.
2 Press to highlight (Settings), then press OK.
NOTE: Press arrow buttons to highlight options and change settings.
Set the time
1 Highlight Time, then press OK.
2 Press to change time format (12:00 or 24:00
hour clock), hour, minutes and AM/PM.
3 Press to move to the next entry.
4 Press OK.
The Date screen appears.
Set the date
1 Press to change the date format, month, day,
and year.
2 Press to move to the next entry.
3 Press OK.
The On/Off Times screen appears.
NOTE: If the frame loses power or you unplug it for more than a minute, you are prompted to reset the time
and date when power is restored or when you plug it back in.
To Next Page
Loading...
