Getting started
www.kodak.com/go/support
7
Installing and removing the paper tray
1 Open the paper tray door on the printer dock.
2 Slide the paper tray cover back until it "clicks" into
place, about 1.25 in. (3 cm).
3 Slide the paper tray in the printer tray slot until the
tray locks into place.
IMPORTANT:
To ensure the paper tray fits squarely on the
printer dock, make sure to keep the paper
tray cover all the way open while installing.
Pull the paper tray out to remove it.
Close the paper tray cover and paper tray door to keep out dust and debris.
■ When the paper tray is empty, the Paper light glows steady amber.
After refilling and installing the paper tray, press the Print button to clear the paper
error and resume printing.
To Next Page
Loading...
