46 www.kodak.com/go/support
Troubleshooting
Picture is too dark ■ Reposition the camera for more available light.
■ Use Fill flash (page 19) or change your position so light is not
behind the subject.
■ Move so that the distance between you and the subject is within the
effective flash range (page 51).
■ To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator turns green, press the Shutter
button completely down to take the picture.
Picture is too light
■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off (page 19).
■ Move so that the distance between you and the subject is within the
effective flash range (page 51).
■ To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator turns green, press the Shutter
button completely down to take the picture.
■ In Auto and SCN-Custom modes, adjust the Exposure Compensation
(page 28).
Status Solution
To Next Page
Loading...
