Z Cameras
Other Digital Cameras
EASYSHARE Software Support
EASYSHARE Gallery Support
Printer Support
Camera Dock Support
Accessories Support
Film Camera Support
Film Support
Inkjet Paper Support
Projector Support
Picture Kiosk Support
Other Product Support
Wireless Support
Product Manuals
Downloads and Software
Upgrades
Frequently Asked Questions
Getting Service & Repairs
Register your product
Red
Eye
In Red Eye flash, you can reduce red eye by using a preflash or by using automatic red eye reduction.
To make the camera:
● Preflash, turn the Red Eye Preflash on. (The first flash shrinks the eye pupil to reduce the
chance of red eye.)
● Flash once and automatically remove red eye, turn the Red Eye Preflash off ( ).
NOTE: When automatic red eye reduction is on, the camera cannot take more than 2 pictures in quick
succession. Take more pictures when the Ready light turns green.
Off Never
Your camera saves the flash setting, even after you turn off the camera. To make the camera return to its default settings
(such as Auto flash), turn off Maintain Settings (
).
For flash settings in each mode, see Flash settings in each mode.
Previous Next
Home
|
Privacy (Dec
2006)
|
Site
Terms
|
Investor
Center
|
Blog
http://www.kodak.com/global/en/service/publications/urg00665toc.jhtml?chapsec=urg00665c2s6&pq-path=10/3905/7168/10510/10540 (2 of 2)19/01/2007 16:01:58
To Next Page
Loading...
Need help?
General
