Taking pictures/videos
www.kodak.com/go/support
13
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press.
1 Place the camera on a tripod or flat surface.
2 In most Still modes, press the Self-timer/Burst
button :
■ Once for a 10-second delay (so you have time
to get into the scene)
■ Again for a 2-second delay (for a steady,
auto-shutter release on a tripod)
■ Again for 2-shot (one picture taken after 10
seconds; another, 8 seconds later)
3 Compose the scene. Press the Shutter button
halfway, then completely down to take
pictures.
The picture is taken after the delay.
To cancel the Self-timer during countdown, press the Self-timer/Burst button ,
or press the Shutter button completely down.
Use the same procedure to use the self-timer in Video mode, but:
■ Turn the Mode dial to Video .
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
To Next Page
Loading...
