Doing more with your camera
www.kodak.com/go/z812support 13
Using the Drive button
Using the self-timer
To cancel the Self-timer before the picture is taken, press the Drive button. (The
Self-timer setting remains active.)
Mode Icon(s) Purpose
Self-timer See Using the self-timer
Burst See page 14
Exposure Bracketing See page 14
Normal (none) Normal picture taking
10
2X
2
1
2
3
4
Place camera on a tripod or flat surface.
Compose the scene.
Press the Shutter button halfway, then completely down.
The picture is taken after the delay.
• Once for a 10-sec. delay (so you have time to get into the scene)
• Again for a 2-sec. delay (for a steady, shutter release on a tripod)
• Again for 2 pictures (after a 10- and 18-second delay)
In any Still mode, press the Drive button.
To Next Page
Loading...
