To Next PageTo Next Page
Need help?Do you have a question about the Kodak EKTAGRAPHIC III AM and is the answer not in the manual?
General| Type | Slide Projector |
|---|---|
| Power Supply | 120 V AC, 60 Hz |
| Lamp Type | 300W Tungsten Halogen |
| Projection Lens Focal Length | 100 mm |
| Image Size | Varies depending on lens and projection distance |
| Format | 35 mm slides |
Steps for removing and installing the projector's lower and top housing assemblies.
Covers replacement of fan shaft, motor, belts, and pulleys for projector operation.
Procedures for replacing thermal fuse, lamp socket, and cycle solenoid assemblies.
Comprehensive guide for removing and installing the central projector mechanism.
Instructions for replacing lens mount, auto-focus switch, and focus shaft assemblies.
Steps for adjusting the cycle solenoid and indexer lever for proper timing and movement.
Procedures for adjusting the manual/power slide lift lever and the zero position switch.
Guide to align focus light path, NULL position, and photocell for optimal image projection.
Steps for adjusting the dark shutter alignment and clamp pad assembly pressure.
Details main motor voltages, plug pinouts, and component voltages for troubleshooting.
Troubleshooting guide for issues related to power supply, lamp operation, and cooling systems.
Troubleshooting guide for problems affecting slide movement, cycling, and tray operation.
Troubleshooting guide for various focus-related issues, including manual, auto, and continuous focus problems.
