26 KODAK EKTAGRAPHIC III Slide Projector
Maintenance
Mirror To clean the mirror, invert the lamp module to reach the mirror. Gently clean
the mirror with a soft, lint-free cloth moistened with lens cleaner.
When your maintenance is complete, push the lamp module back into the
projector.
Thermal Fuses Your projector has two thermal fuses that prevent overheating. If your
projector will not operate, call theKodak Information Center or Kodakin your
country to obtain thename ofa service center nearest you (see “How toObtain
Service” on page 30).
To Next Page
Loading...
