Kodak EKTASOUND 235 - Film Threading Instructions; Loading the Supply Reel

threading
The T A K E - U P R E E L has been placed on the projector at
the factory. Be sure this reel is seated securely on the
TAKE - UP SPINDLE.
NOTE: The R E E L B R A K E prevents film from " spilling " by
pressing against the flat edge of the supplied take - up
reel. Since other take
- up reels may not operate as
well, be sure to use only the KQDAK 400 Movie Reel
supplied.
(400
- foot maximum) of film, perforated '
.
you, onto the S~PLY S P IN D L E
TAKE - UP REEL TAKE-UP SPINDLE SUPPLY SPINDLE