Using your SLICE Album
www.kodak.com/go/slicesupport 19
Tagging pictures so they are easy to find
Tag pictures to make them easy to find, later. You can tag
people, locations, or keywords. For example, the camera can
find pictures that contain “Mary” or “Boston” or “Dad’s 60th.”
Assigning people tags to pictures
1 Press the Review button. Tap the left/right side of the
screen (or swipe) to find a picture that contains faces.
2 Tap the Tag icon, tap Tag People, then tap Apply Tags.
A Name box is superimposed over each detected face (up to 5).
3 If the camera recognizes a face, confirm it. (If you do
nothing, the camera assumes that the names are correct.) If
the camera is not correct, tap the Name box, then choose an
existing name or add a new one.
Repeat these steps to assign names to other faces. When
finished, tap X.
Assigning location tags to pictures
1 Press the Review button, then find a picture to tag.
2 Tap the Tag icon, then tap Location.
3 Tap Enter New Location or Recent Location.
When finished, tap X.
Navteq is a trademark in the U.S. and other countries.
urg_01090.book Page 19 Tuesday, March 2, 2010 11:11 AM
To Next Page
Loading...
Need help?
General
