www.kodak.com/go/slicesupport 9
ENGLISH
Transferring pictures to your computer
Download KODAK Software—so it’s easy to transfer and share pictures and
videos. Make sure the computer is connected to the Internet. When you
connect the camera to the computer, the KODAK Software Downloader
automatically runs. Follow the prompts to download and install KODAK
Software.*
Download Software later www.kodak.com/go/camerasw
Turn on the
camera.
3
1
Turn off the camera.
Follow the prompts to run the
KODAK Software Downloader
on your computer.
2
* If the KODAK Downloader does not run,
find and launch it here:
• WINDOWS OS: in My Computer
• MAC OS: on the Desktop
Use the KODAK Camera
USB Cable, Micro B /
5-Pin to connect
camera to computer.
(Use only the cable
included with this
camera!)
After the software is installed, follow the prompts to
transfer pictures and videos to your computer.
4
5
NOTE: You can also use a card reader to transfer your
pictures/videos.
urg_01090.book Page 9 Tuesday, March 2, 2010 11:11 AM
To Next Page
Loading...
Need help?
General
