22 www.kodak.com/go/easysharecenter
3 Getting help
For product support, go to www.kodak.com/go/slicesupport and choose
Step-by-Step Solutions & Repair.
If the camera does not turn on/off:
If battery power is extremely low, the camera may turn off. In most cases,
this is normal and can be corrected by recharging the battery.
In the U.S. and other countries where the Step-by-Step Solutions
& Repair tool is available:
■ Recharge the battery or install a new one. See page 1.
■ If the problem persists, go to www.kodak.com/go/slicesupport and
select Step-by-Step Solutions & Repair to resolve or to set up a repair
request.
In countries where the Step-by-Step Solutions & Repair tool is not
available:
■ Recharge the battery or install a new one. See page 1.
If the problem persists:
■ Verify that you are using the correct battery. Go to
www.kodak.com/go/batterychart.
■ Recharge the battery or install a new one. See page 1.
■ If the problem persists, go to www.kodak.com/go/wwcontacts to locate
your nearest repair center.
Download software www.kodak.com/go/slicedownloads
Register your camera www.kodak.com/go/register
Email, write, or chat with
Kodak (where available)
www.kodak.com/go/contact
urg_01090.book Page 22 Tuesday, March 2, 2010 11:11 AM
To Next Page
Loading...
Need help?
General
