5
6. REMOTE CONTROL OVERVIEW
You will need to pair the remote control with the projector before using it. Follow these instructions to
pair the 2.4G wireless remote with your projector.
1. Within two (2) minutes of turning on the projector, press and hold both the Vol + and Vol – keys for
approximately three (3) seconds.
2. The indicator light in the remote will lash quickly during this time and then stop. When the
lashing stops, this indicates that the remote has successfully paired with the projector.
NOTE: While the mouse button is activated, the Volume + or Volume - keys will function as page up
and down.
To Next Page
Loading...
