Kodak Medalist II - Focusing Tube Operates Too Freely; Exposure Spacing Adjustment; Range Finder Adjustment Errors

TROUBLE
Focusing tube works
too freely.
Spacing between expo-
sures is too great or
too small.
Range finder is out of
adjustment.
TOOL NO . 501 -l
\
CAUSE
-
REMEDY
The upper guide
rod
(figure 1)
Turn the upper guide rod by means of the
--
has been turned.
screwdriver slot at the back end of the rod
until the focusing tube does not operate so
easily.
Refer to page 19.
The winding key knob has been
Disassemble the camera down to the mech-
forced and the prongs on the left anism plate and adjust or replace the safety
end of the safety lever assembly
lever assembly. Refer to page 15.
(figure 13) are bent.
If the focusing scale does not
If the focusing scale does not read correctly,
read correctly, see page 20. If refer to page 20. If the range finder is out of
the range finder is out of adjust-
adjustment optically , refer to page 16.
ment optically, see page 16.
TOOL NO . 501-D
TOOL NO . 501 0.. , AoOL NO. 501-'
TOOL NO. 501 -1
~~\================~ ) =:#;';TtIIIIIIIII
TOOL NO. 501-W
TOOL NO . 61' ,\
Figure 23
EASTMAN
KODAK
COMPANY, ', ROCHESTER 4, N.Y.
3-47
Printed in the United States of America