66
Connecting to your Printer
1. Make sure both the camera and printer are turned
on.
2. Connect one end of the supplied USB cable to the
USB port on your camera.
3. Connect the other end of the cable to the USB port
on the printer.
If the camera is not connected to a PictBridge
compatible printer, the following error message will
appear on the LCD screen.
The error message above will also appear if the
USB mode is set incorrectly, in which case you
should disconnect the USB cable, check the
USB mode settings, ensure that the Printer is
turned on, and then try
connecting the USB cable again.
To Next Page
Loading...
