76
Message Description Action
Remove USB Cable!
Indicates that you can disconnect the USB
cable.
The message disappears after
you disconnect the USB cable.
Connection Failed! Failure to connect to your PC, printer, TV
Remove USB cable and retry
connection
Write Protect ! The SD card is locked.
Remove SD card and switch
the lever on the side of card to
UNLOCK. The message will
disappear after 2 seconds.
Card Full ! Indicates that the SD card is full.
Replace SD card with another that has
available memory. The message will
disappear after 2 seconds.
Memory Full ! Indicates that the camera memory is full. It disappears after 2 seconds.
Card Error !
During power-on, the SD card cannot be
recognized or a read/write error occurs.
Format the SD card. WARNING:
Formatting the SD card will erase
all data on the card. Copy the
data from the SD card to another
storage, such as a computer.
Otherwise, all data will be erased
after the format.The message will
disappear after 2 seconds.
To Next Page
Loading...
