Kodak PIXPRO SP360 - Installing Battery

11
Installing Battery
1. Open the battery cover
Push the battery cover lock from "LOCK" to "OPEN" along the direction of arrow
①
,
push the battery cover along the direction of arrow
②
, and open the battery cover
along the direction of arrow
③
.
1
2
3
2
2. Insert the battery
Insert the battery into the battery compartment along the direction of arrow
④
(note
the location of the + and - symbols)
4
3. Close the battery cover
Align the battery cover over the battery compartment as shown and set it in place
in the direction of arrow
⑤
. Close the battery cover along the direction of arrow
⑥
,
and push the battery cover lock from "OPEN" to "LOCK" along the direction of arrow
⑦
.
5
6
7
6
Gently pull the tape upward to remove the battery. When inserting the battery,
please do not fold the tape underneath the battery.