Kodak PIXPRO SP360 - Connect Action Cam to Smart Device

24
Connect Action Cam to smart device (or PC) with Wi-Fi.
When in Wi-Fi mode, press the button to immediately disconnect and exit
Wi-Fi mode.
1. Action Cam:
CheckSSID(ServiceSetIdentier)(PIXPRO-SP360_XXXX)andpassword
(initial password: 12345678) indicated on the label in the battery compartment
of the Action Cam. In the main interface, press the button to switch to Wi-Fi
mode. The Action Cam will enter the waiting for connection interface after starting
Wi-Fi connection one second later:
If you wish to turn off Wi-Fi, press the button in order to choose whether
or not to turn off Wi-Fi. After pressing the or button to select ,
press the button to exit Wi-Fi mode.
2. Smart Device or PC:
Enable Wi-Fi mode, it will automatically search the nearby Wi-Fi hotspots. Select
theonewiththesameSSID(PIXPRO-SP360_XXXX)andinputthepassword.
3. Action Cam:
When the Wi-Fi connection is successful, enter the Wi-Fi connection interface.
If you wish to disconnect, press the button. After pressing the or
button to select , press the button to enter the wait for the
connection interface. If you would like to exit WiFi completely, press the
button.
4. Smart Device or PC:
When connected via Wi-Fi, you can tap the App icon on the smart device to
start it; or double-click the App icon on the desktop of the computer to start
it.
5. Action Cam:
When the App is connected to the Action Cam the App connected interface will
appear.
If you wish to disconnect, press the button. After pressing the or
button to select , press the button to enter the wait for the
connection interface.If you would like to exit WiFi completely, press the
button.