Kodak PIXPRO SP360 - Time Lapse Mode; Burst Mode

27
If the Action Cam was set to the Loop recording mode before shutdown, it will automatically start up and start recording when a Micro USB cable is connected to the
Action Cam and an AC adapter (or to an external power supply). (For example: when the Action Cam is connected to a vehicle power supply, it will start and record
automaticallywhentheautomobilestarts.Itwillalsostoprecording,savetheles,andpoweroffoneminuteaftertheautomobileshutsdown.)
Time Lapse mode
Time Lapse enables the recording of an interval of time, and splices the frames together to present a condensed video which usually requires a long period of time to
complete.
Operation method:
Press the button to start recording. Repress the button to stop recording.
1
①
indicates that the current countdown seconds
Sound cannot be recorded in this mode.
Burst mode
Enables ten photos to be captured continuously before auto pause.
Operation method:
Press the button, it will stop after 10 photos are taken.