44
Surfboard Adhesive Mount: To be tacked onto watersports equipment like surf boards
Plane Support (Large)
Plane Support (Small)
Installation method:
1. Assemble the waterproof housing ( 37).
2. Tie one end of the rope to the plane support (small), and the other end to the waterproof housing.
3. Assemble the adapter, pre-tightening nut and plane support (large) in accordance with the direction
illustrated in the picture. Press the adapter into the plane support (large) before rotating and tightening the
pre-tightening nut.
4. Tack the double-sided adhesive onto the bottom of the plane support (large) and attach the plane support
(small) to the object to be used.
The double-sided adhesive is disposable. It should be replaced with a new one after being peeled off.
Plane Support (Large)
Pre-tightening nut
Adapter
To Next Page
Loading...
