Doing more with your camera
www.kodak.com/go/playtouchsupport 15
Applying an LCD Glare Shield filter
Make the LCD easier to see in different conditions, such as the
glare of bright sunlight. (Filters do not control the brightness or
contrast of actual videos or pictures.)
IMPORTANT:
To apply an LCD Glare Shield filter, the feature must
be turned on in the Settings menu (see page 14).
1 Tap the Settings icon ,
then tap LCD Glare Shield.
2 Tap Filters On.
3 Tap to view each LCD Glare Shield filter:
■ Normal
■ High Contrast
■ Black and White
After the description fades, the Glare Shield remains.
Format SD
Card
Delete everything on the card and format the card.
About View firmware and software version.
Reset
Settings
Reset all settings to factory defaults.
Setting Description
urg_01150.book Page 15 Monday, September 27, 2010 9:21 AM
To Next Page
Loading...
