Operating ambient
temperature
KODAK 3D Cloud, KODAK 3D Slicer!
3DS, 3MF, AMF, OBJ, and STL!
KODAK 3D Printing Filaments ABS, Flex 98, HIPS,
Nylon 6, Nylon 12, PETG, PLA+, PLA Tough and PVA.
Compatible with third-party materials.!
Software disclaimer & Third-party licenses
The KODAK Portrait 3D Printer incorporates the following open source products:
Smoothieware firmware for motion control, authored by Arthur Wolf. Our fork can
be found here. Smoothieware is released under the GNU GPL v3.
Node-red: Copyright JS Foundation and other contributors, released under the
Apache 2.0 license.!
To Next Page
Loading...