Proposition 65 requires businesses to provide warnings about
significant exposures to chemicals listed by the State of California
that cause cancer, birth defects or other reproductive harm. By
requiring that this information be provided, Proposition 65 enables
consumers to make informed decisions about their exposures to
these chemicals.
Proposition 65 also prohibits businesses from knowingly
discharging significant amounts of listed chemicals into sources of
drinking water. !
Electrical Safety
The KODAK Portrait 3D Printer has been tested according to IEC 60950 and
IEC 62368-1 applicable to low voltage devices.
The KODAK Portrait 3D printer is an industrial machine, and as such you must
read the instructions before using it. It is not intended for use by children
under the age of 14 without proper supervision, nor by people with reduced
manual, motor and psychomotor skills.
• This device has an automatic voltage switch. Ensure the product is well-
grounded. Failure to ground the product may result in electrical shock or
susceptibility to electromagnetic interference.
• Avoid overloading an electrical outlet with multiple devices. This device
consumes up to 320W, about the same as a powerful desktop PC.
• To prevent short-circuit overloads, overheating and damage use only the
power cable supplied with the product. Do not damage, cut or repair the
power cable.
• Do not disassemble the product, there are no user serviceable parts
inside. If you experience any problems, please contact your local Service
Representative. See User Guide / Warranty section below.
CUSTOMER SERVICE
Should you experience any problems with your product, please visit
support.smart3d.tech or contact us. We are here to help!
Website
:
support.smart3d.tech
Email
:
support@smart3d.tech!
WARNING: This product can expose you to chemicals, including
styrene, acrylonitrile and butadiene, which are known to the State
of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.!!
To Next Page
Loading...