Getting started
www.kodak.com/go/support
5
If your wireless network is still not shown, your
network name (SSID) may not be broadcast. To
enter it manually:
a Touch Non-Broadcast.
The on-screen keyboard appears.
b Using the on-screen keyboard, enter the SSID. If
you do not know your network name, ask the
person who set up your network.
c When finished, touch OK.
Touch Back to go to the network screen.
If your router supports Wi-Fi Protected Setup
(WPS), the WPS screen appears. Press the WPS
button on your router to automatically connect to
your wireless network.
If you are asked to enter your security code
or your WPS PIN code, use the on-screen
keyboard to enter it, then touch OK. If you do not
know your code, ask the person who set up your
network.
The frame scans for your wireless network. A message
appears when it has successfully connected.
To Next Page
Loading...
