6 www.kodak.com/go/support
Getting started
Activating your frame
The activation screen appears the first time you connect to your wireless network (see
page 6). Activating your frame is the first step in being able to send pictures from your
computer to your frame using a free Web-based application.
NOTE: If someone else already set up your frame, your frame may already be activated, and the activation
screen may not appear.
1 Write down and save the activation code.
To dismiss activation and go to the slide show view,
touch Exit (see page 9).
NOTE: The activation code can also be found beneath the serial
number on the product packaging.
2 On your computer, visit www.kodakpulse.com to
create a new account. Follow the instructions and
enter your activation code when prompted.
The frame communicates with the Web server to verify
your account information.
If someone else already set up your frame,
you may be asked to verify the existing account
information. Touch OK on the frame if the
information shown is correct, or Not Me if the
information is incorrect. Follow the on-screen
instructions.
After your account information has been verified, a
welcome screen appears.
To Next Page
Loading...
