9 www.kodak.com/go/pulseframesupport
Getting started
Secure, WPS, non-broadcasting, and other special
network conditions
Network is secure
If your network is secure (requires a security code or password and is indicated with a
lock icon), the on-screen keyboard appears after you touch your network (see page 5).
1 When prompted, use the on-screen keyboard to
enter the security code (password) for your
network.
NOTE: Security codes may be case sensitive.
■ Touch to switch between upper- and
lowercase characters.
The keyboard default is lowercase.
■ Touch to enter numbers and special
characters.
If you do not know your security code, ask the
person who set up your network.
The digital frame scans for your wireless network. A message appears when it has
successfully connected.
2 When finished, touch OK.
3 Continue with Activating your frame—www.kodakpulse.com, page 7 to finish
your setup.
Wi-Fi Protected Setup (WPS)
If your router supports Wi-Fi Protected Setup, the WPS screen appears after you touch
your network (see page 5).
1 Press the WPS button on your router to automatically connect to your wireless
network.
To Next Page
Loading...
