Kodak S-AV 2050 - User Manual

1
Slide Projector Maintenance
MAINTENANCE: Kodak S-AV 2050 slide projectors
Kodak S-AV 2050: front view Kodak S-AV 2050: side view with carousel Kodak S-AV 2050: dismantled
The below maintenance tasks are based on our experiences when looking after slide-based artworks
across multiple Tate sides. Rather than responding to failure during opening hours, our approach is
driven by pre-emptively minimising its chance. In order to keep track of the maintenance carried out
please set up a maintenance log that notes the action taken as well as any problems that occurred during
the course of the display.
 The following items are required:
- ‘3-In-One’ lubrication oil and grease
- Oil free air compressor or compressed air cans
- Lint free tissue, anti-static brush
TWICE A WEEK AND WEEKLY MAINTENANCE
 The lamp inside the projector needs to be changed twice
a week. It is important that this is done
before the lamp fails. A schedule can be set up based on the average 40 hours life expectation of the
lamp. It is necessary to wear gloves when changing the lamp as grease spots on the lamp reduces its
life and cause them to blow prematurely.
 The slide projector needs to be cleaned once
a week by a trained AV technician. This includes
dusting the outer body of the projector as well as the lens and optical path (there are 4 lenses and
filters inside the projector). The cleaning of the projectors optics, such as the lens, condenser and
heat filter should be carried out using a soft lint e cloth or an anti-static brush.
If the projector begins to make a squeaky noise, this is usually caused by the ventilation wheel inside
being dusty and/or that the bearings may need lubrication.
MONTHLY BASIS
 Once a month a deep clean needs to be carried out on the slide projector. Dirt and dust can have
adverse effects on the lubricants used on the rotating parts inside the slide projector and thus may
lead to malfunctioning.
See detailed maintenance instructions at the end of the report. This will take circa 40 minutes for
each.

Summary

Kodak S-AV 2050 Slide Projector Maintenance Overview

Maintenance Schedule

Details maintenance tasks for twice a week, weekly, and monthly basis for projectors.

Slide Projector Instructions

Lamp Changing Procedure

Step-by-step guide for safely replacing the projector lamp, including safety precautions.

Projector Dismantling

Instructions on how to dismantle the projector to access internal components for cleaning and maintenance.

Servicing Tasks

Details on cleaning, lubrication, and checking projector components like the fan and carousel.

Slide Projector Reassembly and Alignment

Reassembly Steps

Guidance on reassembling the projector, including optics, lamps, and external parts.

Lamp Centering

Procedure for aligning the lamp filament correctly to ensure optimal projection.

Maintenance Checklist

A checklist of checks to perform, including voltage, fuse, noise, and component inspection.

Final Checks and Reporting

Post-Maintenance Procedures

Final checks, including fan positioning, slide mechanism testing, and optics replacement.

Report Creation

Information on who created the maintenance report and the date it was created.

Kodak S-AV 2050 Specifications

General

Brand	Kodak
Model	S-AV 2050
Category	Projector
Language	English