A-61816 April 2014 2-3
Connecting the power
adapter and USB cable
When the drivers have been installed, connect the power adapter and
USB cable to the scanner. Refer to the illustration below for making
proper connections. Make sure the power outlet is located within 1.52
metres (5 feet) of the scanner and is easily accessible.
1. Select the appropriate AC
plug adapter for your region from the
supply of plug adapters packed with your scanner.
2. Attach the correct AC plug adapter to the power adapter and insert
the power adapter into the wall outlet.
3. Plug the power adapter into the power port on the scanner.
4. Attach the USB cable to the scanner USB port, located on the back
of the scanner.
To Next Page
Loading...
