Using an EYE-FI Card (optional accessory)
www.kodak.com/go/Z5120support 23
Choosing the Selective Share setting—recommended
1 In a picture-taking mode, press the Menu button.
The Settings menu appears.
2 Press to highlight EYE-FI, then press the OK button.
3 Choose Selective Share (recommended).
When you’re in range of your known Wi-Fi network, turn on the camera
to transfer pictures to your computer or mobile device.
Other EYE-FI Information
■ It’s critical that you disable (do not turn on) Endless
Memory Mode in EYE-FI Center Software.
■ As of December 2010, EYE-FI Cards are certified for use in the
countries and regions in which they were purchased.
■ The EYE-FI Card has a wireless LAN function. Do not insert the
EYE-FI Card where Wi-Fi is prohibited, such as while aboard an
airplane or in a hospital.
■ Even when you set EYE-FI to Off, the card may transmit radio waves.
■ The card may become warm during use. This is normal.
■ Battery life is reduced when using an EYE-FI Card.
■ For the best reception when transferring pictures to a computer or
mobile device, the rear (LCD side) of the camera should face the
Wi-Fi access point.
Get support for EYE-FI Cards and Software support.eye.fi
urg_01328.book Page 23 Monday, October 24, 2011 9:23 AM
To Next Page
Loading...
