CAUTION: ELECTROSTATIC DISCHARGE
Electronic controls contain static-sensitive parts. Observe the following
precautions to prevent damage to these parts. Discharge body static before
handling the control (with power to the control turned off, contact a
grounded surface and maintain contact while handling the control). Avoid
all plastic, vinyl, and Styrofoam (except antistatic versions) around printed
circuit boards. Do not touch the components or conductors on a printed
circuit board with your hands or with conductive devices.
IMPORT
ANT
DEFIN
A WARNING:
indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
A CAUTION:
indicates a potentially hazardous situation, which, if not
avoided, could result in damage to engine or property
.
A NOTE:
provides other helpful information that does not fall under
the warning or caution categories.