EasyManuals Logo

Kofloc FM01 Series User Manual

Kofloc FM01 Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
MJ400080F1
III. Cautions
(1) Avoid water pressure exceeding the specified value and cleaning with reverse flow, which will
damage the sensor portion and cause failure.
(2) If measured fluid in the tube hole is frozen, the sensor portion may be damaged. If there is the
possibility of freezing, take heat insulation measures.
(3) FM01 series including threaded portion is made of resin. Excessive tightening when fitting and
unnecessary external force must be avoided.
(4) Do not hold the output cable when carrying the product. The soldered connection of the cable
and electronic circuit may be damaged.
(5) The circuit portion must not be subjected to dew condensation.
IV. Insulation resistance/dielectric strength test
The insulation resistance/dielectric strength test must not be conducted because there is the
possibility of the electronic circuit being damaged.
Warranty
1. The contents of warranty
Warranty period
The warrant period shall be one year after the shipment.
Warranty range
If a malfunction of the product you purchased occurs because of our responsible reasons, offer of
substitute or it will be charge-free repaired in our factory. But if a malfunction of the machine occurs
due to the following reasons, even within the warrant period, it becomes the outside for a warranty.
(a) Malfunctions due to erroneous applications, repairs or remodeling.
(Including the case in which the manufacturing specification differs from the application conditions.)
(b) Malfunctions due to the falling after the purchase.
(c) Malfunctions caused by natural disasters such as fire, earthquake, water disaster and lightning
stoke, or riots or wars.
(d) Malfunctions caused by mixing-in of foreign matters out of the piping.
(e) Malfunctions caused by the peculiar problems due to combinations with other built in equipment.
In addition, a warranty here means the warranty of the product simple substance of our company. So
the damage induced by failure of the products of our company shall be eliminated from the object of
warranty.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kofloc FM01 Series and is the answer not in the manual?

Kofloc FM01 Series Specifications

General IconGeneral
BrandKofloc
ModelFM01 Series
CategoryMeasuring Instruments
LanguageEnglish