35Section 1 SpecificationsTP-6953 7/19
1.17 Decision-Makerr 3500 with
Integral Voltage Regulator
The voltage regulator is integral to the controller and
uses a patented hybrid voltage regulator design to
provide 0.5% no-load to full-load regulation using
root-mean-square (RMS) voltage sensing.
The voltage regulator features three-phase sensing and
supports both 12- and 24-volt engine electrical systems.
D The Decision-Makerr 3500 graphical display and
pushbutton/rotary dial provide access to data. A
five-line, 35-characters per line LCD display provides
complete and concise information include gain, ramp
rate, reactive droop, VAR control (P, I, D gains), and
PF control (P, I, D gains).
D The controller supports Modbusr.
Voltage Regulation Menu
D Voltage adjustment, 10% of system voltage
D V/Hz cut-in, 42- 62 Hz
D Underfrequency unload slope, 0- 10% of system
voltage
D Reactive droop, 0.0- 20%
D Voltage regulator gain adjust, 1- 255
D Startup ramp rate, 5.0% to 100.0%/sec
Generator Set Calibration Men u
D L1-L2 volts
D L2-L3 volts (3-phase)
D L3-L1 volts (3-phase)
D L1-N volts
D L2-N volts
D L3-N volts (3-phase)
D Gen L1 current
D Gen L2 current
D Gen L3 current (3-phase)
D Bus L1- L2 volts
D Bus L2- L3 volts (3-phase)
D Bus L3- L1 volts (3-phase)
Modbusr is a registered trademark of Schneider Electric.
To Next Page
Loading...
