TP-7102 9/21 41Section 3 RDC2 Controller Operation
3.16 Date and Time Menu
The date and time will typically be set at controller
power-up. To change the date, time, or time format
(12 hour or 24 hour), use the Date and Time menu.
See Figure 3-16.
tp6810
Date:
02Feb2018
Time:
12:34pm
Time Format:
12hr|24hr
Date and
Time
<- - Return
To change the date and time, pr ess the Select button
See Figure 3-6 for instructions.
Figure 3-16 Date and Time Menu
To Next Page
Loading...
