Need help?Do you have a question about the Kohler 7EFKOZD and is the answer not in the manual?
General| Model | 7EFKOZD |
|---|---|
| Type | Portable Generator |
| Fuel Type | Gasoline |
| Starting System | Recoil |
| Rated Wattage | 7000 Watts |
| Surge Wattage | 8750 Watts |
| Run Time at 50% Load | 10 hours |
| Noise Level | 74 dBA |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| AC Output | 120/240V |
| Outlets | One 120/240V 30A Twist-Lock Outlet |
Safety warning regarding accidental starting of generator sets and precautions.
Safety warning about fire hazards, fuel vapors, and combustible materials.
Warning about potential hearing damage from generator operation.
Warning about severe injury or death from electrical hazards and moving parts.
Key factors for locating a generator set for optimal installation and access.
Guidance on selecting the ideal location for generator set placement.
Instructions for securely mounting the generator set to the vessel's structure.
Requirements for engine combustion and generator cooling ventilation.
Overview of essential components for the marine generator set's cooling system.
Installation of a screened intake strainer to protect the cooling system.
Description of wet and dry exhaust systems used in marine generator sets.
Guidelines for installing water-cooled exhaust lines, including hose and clamp requirements.
Instructions for positioning, mounting, and installing the exhaust system.
Procedure for installing the exhaust system above the vessel's waterline.
Procedure for installing the exhaust system below the vessel's waterline.
Guidelines for fuel tank connections and pickup arrangements for generator sets.
Proper routing and connection of fuel lines, including return lines and tank pickup.
Conformity with USCG regulations for inline fuel filters and strainers.
Installation requirements for fuel/water separators to remove contaminants.
Specifications for fuel pump lift capabilities based on model.
Procedures for making AC voltage connections inside the generator set junction box.
Information on AC circuit breakers for protecting generator set wiring and output.
Specific considerations for installing generator sets in conductive hull materials.
U.S. Coast Guard regulations governing generator set installation on vessels.
Battery recommendations and sizing requirements conforming to USCG regulations.
Guidelines for using stranded copper wire and protecting wiring according to USCG standards.
Details on connecting remote panels and wiring harnesses for generator set control.
Procedure for changing generator set voltage and frequency settings.
Illustrations and procedures for reconnecting four-lead generator sets.
Wiring configurations for 100-120 volt single-phase generator sets.
Wiring configurations for dual-voltage, three-phase generator sets.
Wiring configurations for 200-240 volt single-phase generator sets.
Procedure for reconnecting twelve-lead generator sets for voltage changes.
Calculating generator capacity requirements for electric motor startup loads.
Determining lighting load by summing wattage of generator-operated lamps.
Understanding variable starting characteristics of air conditioners for generator sizing.
Estimating appliance load requirements, including TVs and water heaters.
To Next Page
