To Next Page
S
Steven RyanAug 4, 2025
What to do if the impeller on my Kohler 5EKD-Low CO Portable Generator is damaged?
- CCheryl PowellAug 4, 2025
If the impeller of your Kohler Portable Generator is damaged, replace the impeller and check the upstream system.
What to do if the impeller on my Kohler 5EKD-Low CO Portable Generator is damaged?
If the impeller of your Kohler Portable Generator is damaged, replace the impeller and check the upstream system.
What to do if my Kohler 5EKD-Low CO has an engine overload?
If your Kohler Portable Generator experiences an engine overload, reduce the electrical load. Refer to the generator set installation manual for specific wattage details.
What to do if my Kohler Portable Generator battery is weak?
If your Kohler Portable Generator has a weak or dead battery, recharge or replace the battery. Consult the spec sheet for the recommended battery CCA rating.
General| Model | 5EKD-Low CO |
|---|---|
| Type | Portable Generator |
| Fuel Type | Gasoline |
| CO Shutdown | Yes |
| AC Output | 120/240V |
| Low CO Technology | Yes |
| Rated Wattage | 5000 W |
| Starting Wattage | 6250 W |
| Engine | Kohler OHV engine |
| Starting Method | Electric/Recoil |
| Max Wattage | 6250 W |
| Noise Level | 68 dBA |
Record product identification numbers from the generator set nameplate.
Record product identification information from the engine nameplate.
Procedures to prevent unintended generator set startup and associated risks.
Warnings and precautions regarding engine backfire and fire risks.
Safety guidelines for handling flammable fuels and vapors near the unit.
Precautions when dealing with hot coolant and steam during maintenance.
Instructions and notices for proper fuse replacement.
Advice on cleaning saltwater to prevent corrosion on metal surfaces.
Identifies maintenance and service parts for the generator set.
Lists available literature for generator set installation and service.
Checks to perform before starting the generator set for satisfactory operation.
Recommendations for vessel and generator exhaust system inspection.
Describes the user interface and components of the control system.
Step-by-step procedures for starting the generator set locally or remotely.
Procedures for stopping the generator set locally or remotely.
Lists fault conditions that cause shutdown or warnings.
Explanation of the line circuit breaker's function and reset.
Details on the location and types of fuses in the junction box.
General maintenance tasks and safety precautions.
Recommended oil types and viscosity grades for the engine.
Procedures for checking and adding engine oil levels.
Recommended fuel type and quality for the generator set.
Procedures for replacing the fuel filter and bleeding the fuel system.
Information on the closed cooling system and coolant capacity.
Details on the pressure cap and coolant system ratings.
Procedures for inspecting and replacing the seawater pump impeller.
Maintenance procedures for the seawater flow switch.
How to check and adjust the generator belt tension.
Procedures for inspecting the siphon break system to prevent water entry.
Guidance on battery maintenance and manufacturer instructions.
Steps for preparing the generator set for long-term storage.
